E-Mu PROTEUS FX Uživatelský manuál Strana 81

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 134
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 80
5 - Effects
Effects Descriptions
E-MU Systems 81
Modulation Parameters
Wet/Dry Mix
Feedback
Parameter Description
Left Delay Time Sets the length of the delay for the left channel in milliseconds.
Range: .01 millisecond to 2000 milliseconds
(.01ms. minimum increment between settings)
Right Delay Time Sets the length of the delay for the right channel in milliseconds.
Range: .01 millisecond to 2000 milliseconds
(.01ms. minimum increment between settings)
Mode Changes the signal routing of the delay. The four modes are:
Discrete stereo - signal paths remain completely separate.
Ping Pong, stereo - The feedback paths feed the opposite
channel.
Ping Pong, mono L->R - The effected signal is summed to
mono, then fed down the left channel whose feedback path feeds
the right channel. The right channel feedback path feeds the left
channel.
Ping Pong, mono R->L - This is the same as the previous
algorithm except that the L-R channels are reversed.
Feedback Sets the amount of delayed signal that will be recirculated through
both delay lines. Range: 0% to 100%
HF Damping High Frequency Damping cuts the high frequency content in the
feedback paths. This causes the echoes to decay naturally away.
Zobrazit stránku 80
1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 133 134

Komentáře k této Příručce

Žádné komentáře